Issues to be noted during the use of zinc steel guardrails

Jan 29, 2024 Leave a message

Do you know what issues to pay attention to when using zinc steel guardrails? Next, the editor will give you a brief introduction.

 

1, Do not use sharp objects to scratch the surface coating of balcony guardrails. Generally speaking, the coating is to prevent rusting and corrosion of the guardrails.

 

2, If rust spots are found on the guardrail block, cotton yarn dipped in engine oil should be applied to the rust area as soon as possible. This can remove the rust, and cannot be directly polished with sandpaper or other rough materials.

 

3, If it is only general outdoor air humidity, the rust prevention performance of guardrail equipment is not a problem. However, in foggy weather, dry cotton cloth should be used to remove water droplets on the guardrail. If it is rainy, the water on the guardrail should be wiped dry in a timely manner after the rain stops, and the zinc steel guardrail should be moisture-proof.

 

4, Most zinc steel guardrails are used outdoors, with dust flying and accumulation of dust. There will be floating dust on the zinc steel guardrail, which directly affects the glossiness and beauty of the guardrail, leading to damage to the protective film on the surface of the guardrail. Therefore, it is necessary to regularly wipe the outdoor zinc steel guardrail equipment, generally using soft cotton fabric for wiping.

 

17

 

5, Stay away from acidity and alkalinity. The acid and alkali that corrode zinc steel are the number one killers of zinc steel guardrails. If acid (such as sulfuric acid, vinegar) or alkali (such as methylamine, soapy water, soda water) accidentally gets on the zinc steel guardrail, the dirty area should be immediately washed away with clean water, and then wiped dry with a dry cotton cloth.