Welded Mesh

Your Professional Welded Mesh manufacturer!

Tianjin Anguyuan metal products Co., Ltd. was established in 2007 October,continuously upgrading and innovating our products through time iteration to meet customer needs.Products are widely used in industrial and civil construction, such as: High speed railway, bridge, highway, subway, tunnel, factory, ping, airport, dam, slope protection, concrete precast slab and wall, commercial buildings, stadiums, guardrail etc..Our is one of China top professional welded mesh manufactures.

Why Choose Us

Rich experience

Our company was established in 2007 October,have over 17 years of industry experience.Annual output capacity of 30000 tons.

Advanced equipment

Our company introduction of welding production line is the most advanced international.

Production market

Our products coverage throughout the country and exported to Europe, Australia, Southeast Asia and other regions.

Our service

We have full-time online customer service to meet customer needs.

Welded Mesh Fabric
Welded wire mesh, or welded wire fabric, or "weldmesh" is an electric fusion welded prefabricated joined grid consisting of a series of parallel longitudinal wires with accurate spacing welded to...
read more
Welded Steel Fabric
The concept of Welded steel fabric/ mesh was first proposed in 1901, while the first major application was in 1908. In 1922, it was tested to be the sufficiently suitable material for roads of...
read more
Welded Mesh Fabric
The concept of welded steel fabric/ mesh was first proposed in 1901, while the first major application was in 1908. In 1922, it was tested to be the sufficiently suitable material for roads of...
read more
Welded Steel Wire Mesh
The concept of welded steel fabric/ mesh was first proposed in 1901, while the first major application was in 1908. In 1922, it was tested to be the sufficiently suitable material for roads of...
read more
Welded Steel Wire Fabric
The concept of welded steel fabric/ mesh was first proposed in 1901, while the first major application was in 1908. In 1922, it was tested to be the sufficiently suitable material for roads of...
read more
Welded Wire Reinforcement Mesh
Welded reinforcement concrete mesh is one heavy type welded wire mesh products, widely used in concrete, construction and buildings.
read more
Welded Plain Wire Reinforcement
Welded wire reinforcement (construction mesh) is an efficient and economical replacement for rebar as reinforcement in concrete construction.
read more
Concrete Steel Wire Mesh
The concept of welded steel fabric/ mesh was first proposed in 1901, while the first major application was in 1908. In 1922, it was tested to be the sufficiently suitable material for roads of...
read more
Standard Steel Fabric
Welded wire mesh is constructed from rigid wires welded at every intersection to provide a very stable and uniform surface.
read more
Merchant Steel Fabric
Standard steel FabricThis reliable and robust concrete fabric mesh by ROM is ideal for security on building projects. It is a high quality steel reinforcement for cast concrete applications. It...
read more
Flying End Fabric
Steel mesh is used in beam and column floor, roof, wall, concrete pavement, bridge deck pavement, airport runway, tunnel lining, box culverts, dock floor, prefabricated components and other fields...
read more
Purpose Made Steel Fabric
Steel bar welding mesh is a network of steel bar products welded in the factory, which is longitudinal and transverse steel bars arranged at a certain distance and at right angles to each other,...
read more

First 12 Last

Advantages of welded mesh

Durable
The welded joints make the mesh much stronger as compared to bars that are simply tied together. This means that individual bars are less likely to bend or break under stress, giving the finished structure greater stability. In case of bending, the entire mat would bend together, thereby not compromising its structural integrity.

Corrosion resistance
Welded mesh types can also be variants because of the different welded wire fabrics used in manufacturing, like stainless steel, galvanized steel, powder-coated steel, or pvc-coated steel, which protects the mesh from rust and makes it last a long time.

Versatility
The welded wire mesh types can be used with a wide range of materials, forms, sizes, costs, and more. Because of this, it can be used for a wide range of tasks and in projects of all welded wire mesh sizes.

Easy installation
Since welded mesh is prefabricated, it can be erected much faster than other types of reinforcement such as concrete blockwork or steel rebar. This is particularly beneficial on large construction projects where time is of the essence.

Economical
Welded mesh requires less steel reinforcement than other methods, making it more cost-effective. This makes it an attractive option for construction companies who are looking to save valuable capital on their project.

Application of welded mesh

Construction
In construction, welded mesh is used to reinforce concrete structures such as walls, floors, and sidewalks. This provides added tensile strength, making the concrete less prone to cracking and improving its overall durability.

Fencing
Welded mesh is a popular choice for fencing, providing security and visibility. It’s used for residential, commercial, and agricultural fencing, ensuring the safety of properties, livestock, and crops.

Landscaping
Gardeners and landscapers use welded mesh for various applications, including creating trellises, supporting climbing plants, and protecting gardens from pests. Its strength and flexibility make it a valuable tool in the horticultural world.

Industrial
In industrial settings, welded mesh is used for machinery guarding, safety enclosures, and material handling. Its ability to withstand heavy loads and provide visibility makes it ideal for these applications.

Animal enclosures
Zoos, farms, and animal shelters utilize welded mesh for animal enclosures and cages. Its strength and durability ensure the safety and containment of animals.

Types of Welded Mesh

Steel Welded Mesh
This is the most common type, known for its robustness. It’s extensively used in reinforcing structures, fencing, and various industrial and manufacturing applications.

Galvanized Welded Mesh
Characterized by its rust-resistant properties, it’s an ideal choice for outdoor settings where weather exposure is a concern. Its protective coating ensures longevity, making it a prime example of a durable welded wire mesh material.

Stainless Steel Welded Mesh
Recognized for its high strength and excellent corrosion resistance, this type is particularly suited for environments where exposure to chemicals or corrosive materials is common.

PVC Welded Mesh
PVC welded mesh is coated with a thin layer of PVC powder to provide corrosion resistance, adding color and protecting the underlying metal. In addition to its resistance to corrosion, PVC welded mesh is also resistant to aging, sunlight, and weather.

Welded Wire Fencing
Welded wire fencing is available in rolls or panels and can be galvanized or non-galvanized, with non-galvanized options generally being more affordable. Installation is straightforward, particularly when replacing or adding to an existing deck.

Welded mesh manufacturing process

01/

Wire rod
The raw material used for product material is of low carbon steel from various steel manufacturers, commonly known as wire rods. The raw material grades are SAE 1008, SAE 1010, and SAE 1012 which has a percentage of carbon in the range of 0.08 to 0.12.

02/

Cold rolling
Cold rolling is a metal working process in which metal is deformed by passing it through rollers at a temperature below Recrystallisation temperature. Cold rolling increases the yield strength and hardness of a metal by introducing defects into the metals crystal structure. These defects prevent further slip and can reduce the grain size of the metal.

03/

Straightening & cutting
Specialized machinery from Italy is used for straightening and cutting process. The cold rolled wire rods in the coil form is passed through pre set die and cartridge units (special sets for different diameter wire rods) present in the straightening and cutting machine, where the wire rods are first straightened and then cut to set length (precision up to 2 mm) automatically. The wire rods can be cut to any size ranging from 0.8 metre to 12 metre with a max tolerance of 2 mm.

04/

Welding
Welded wire steel fabric is manufactured with automatic welding machines, where wires are welded together in square or rectangular grids. The wires are welded by electric resistance in an automated state of the art machine which controls welding parameters precisely. All the settings for dimensions and welding are programmable. The weld is formed by a controlled combination of pressure, intensity and duration of electric current to develop fusion of the wires. Welded steel fabric utilizes welded intersections for bond and anchorage.

05/

Bending & cutting
The cutting machine is used for cutting the finished meshes to desired dimension. It is a motorised unit, capable of cutting meshes at a speed of 2 to 3 cut per second. The bending machine available is used to bend the cut meshes to the required shape (as required by design). The machine is capable of bending sheet to any angle (Up to 180o). Depending upon the design requirements, the sheets requiring cutting and bending will be taken for this operation else the meshes will be directly taken for despatch from the third process.

06/

Finished mesh
After the bending and cutting process comes the final stage in manufacturing process, galvanizing or PVC coating.

Product Parameters

Specification List of Welded Mesh
Opening		Wire Diameter
In inch	In metric unit(mm)
1/4" x 1/4"	6.4mm x 6.4mm	22,23,24
3/8" x 3/8"	10.6mm x 10.6mm	19,20,21,22
1/2" x 1/2"	12.7mm x 12.7mm	16,17,18,19,20,21,22,23
5/8" x 5/8"	16mm x 16mm	18,19,20,21
3/4" x 3/4"	19.1mm x 19.1mm	16,17,18,19,20,21
1" x 1/2"	25.4mm x 12.7mm	16,17,18,19,20,21
1-1/2" x 1-1/2"	38mm x 38mm	14,15,16,17,18,19
1" x 2"	25.4mm x 50.8mm	14,15,16
2" x 2"	50.8mm x 50.8mm	12,13,14,15,16
Technical Note: 1.Standard roll length: 30m;width: 0.5m to 2.0m 2.Special sizes available at request 3.Packing: in waterproof paper in rolls. Custom packing available at request.

Packaging and shipping

Welded mesh in panel: Are wraped with the shrinked plastic bag then packedin the pallets.

Welded mesh in rolI:Are by water proof paper then shrinked plasticbag as our negotiation.

Custom packing available at request.

FAQ

Q: What is the difference between wire mesh and welded mesh?

A: Woven wire mesh is a series of wire interlocked together during the weaving process and is ideal for filtration, particle analysis, and screen printing. Welded mesh is a mesh sheet that is welded at each cross-section and is ideal when heavy-duty mesh openings are needed.

Q: Does welded mesh rust?

A: When welded wire mesh is exposed to rain, humidity, or any form of water, the moisture reacts with the metal, initiating the rusting process. Environmental Conditions: Harsh environmental conditions, such as coastal areas with high salt content in the air, can accelerate the rusting process.

Q: How do you cut welded wire mesh?

A: Choose the Right Tool: For most wire mesh materials, heavy-duty scissors or tin snips are suitable. For very thick mesh in tougher materials like thick stainless steel, a rotary tool or angle grinder with a cutting wheel may be necessary.

Q: How do you tie welded mesh?

A: Attach two sections of the welded mesh together by overlapping them and using cable ties to join them. Make sure not to overtighten the cable ties.

Q: How do you cut welded mesh?

A: Use wire cutters for wire up to 1.2mm (18 gauge). Cut each strand of wire individually, as closely as possible to the weld points. While you are doing this, pull away the detached part of the mesh to avoid any injuries. you would have to saw through each wire strand individually.

Q: What is the most common welded wire mesh?

A: Square mesh: Square mesh is a type of welded mesh that has evenly spaced wires that intersect at right angles. It is commonly used in fencing, construction, and industrial applications. Square weld mesh is by far the most common type of mesh on the market.

Q: What size welded wire mesh for sidewalks?

A: Minimum rebar thickness – 3/8”. Minimum slab thickness of 4” and concrete to be a minimum of 2,500 psi. Minimum 6” x 6”, #6 gauge welded wire fabric shall be used in sidewalk & driveways.

Q: How do you bend welded mesh?

A: Bending with Pliers: For small bends, grip the desired section with bending pliers and apply pressure. Ensure even force for a uniform bend. Hammering for Precision: After the initial bend, place the mesh on a flat surface and lightly hammer any uneven sections to achieve the desired angle.

Q: How do you specify welded wire mesh?

A: Welded wire reinforcement is designated by two numbers and two letter-number combinations. An example is 6x8 – W8 x W4. The first number gives the spacing in inches of the longitudinal wires. The second number gives the spacing of the transverse wires in inches.

Q: What is the purpose of welded mesh?

A: Welded wire mesh is commonly used to support concrete structures, enhancing their load-bearing capacity and overall strength. In walls and floors, welded wire mesh helps distribute loads evenly and prevent structural weaknesses, ensuring longevity and durability.

As one of the leading welded mesh manufacturers and suppliers in China, we warmly welcome you to buy cheap welded mesh for sale here from our factory. All custom made products are with high quality and competitive price.

welded steel wire fabric, welded steel fabric, merchant steel fabric