Architectural mesh is used for municipal construction, including the pavement layer of elevated overpasses, concrete aerial spaces in squares, concrete pipes, fences, slope protection, etc; Water conservancy, electricity, coal: water conservancy equipment, power dam foundation, protective nets, etc; Building mesh is used in other areas such as flood control equipment, slope reinforcement, collapse protection, animal husbandry, etc.
The use of building mesh is also widespread, and it can be used as a mesh for external wall insulation. The fixing method for hot-dip galvanized steel wire mesh is to use plastic shortened bolts to fix the steel wire mesh. When fixing the steel wire mesh, the steel wire mesh should be nailed and hung from the top layer along the edges and corners. The steel wire mesh should be laid horizontally, or it can be laid straight according to the grid joint scale.
When nailing the steel wire mesh, first remove one end of the steel wire mesh (50 millimeters away) into an L-angle for easy turning and overlapping. Use steel wire with a diameter of no less than 1.5 millimeters to make a V-shaped clip. First, fix the steel wire mesh, and then drill holes or anchor the device with a plum blossom pattern.
The floor slab is made of cast-in-place reinforced concrete slab, and pressed steel plates are laid on the steel beams of the floor as permanent formwork. Among them, the upper iron adopts welded steel mesh. The construction mesh is a type of construction mesh composed of low-carbon wire rod steel bars, which are cold-rolled and corrected, and then distinguished by welding mesh equipment to display the longitudinal and transverse steel bars at a certain distance. The intersection points are all welded together by resistance welding.